Project

# Title Team Members TA Documents Sponsor
26 Heart rate alarm system for swimmer in triathlon
Teamwork Award
Yunye Gong
Zilin Dou
design_document0.document
final_paper0.pdf
presentation0.pdf
proposal0.pdf
This project is intended to be used by swimmers in triathlon or open water swimming competitions. The project will provide a remote alarm system connecting the athletes and rescuers so that the rescuers can quickly find the athletes that need help.
This project includes two parts: wireless emitter part and receiver part. The emitter part should be carried by each player and the receiver is used by rescuers traveling with the players on motorized water scooters. The emitter includes a heart rate monitor. Once it detects an abnormal heart rate, the buzzer will sound and LED will flash. At the same time, the emitter will send out a signal to the rescuer. When the wireless receiver catches the signal,it will trigger the alarm and LED to notify the rescuer that someone needs help. This will bring help to the athletes in a shorter time. Our system also includes a manual switch that can be controlled by the swimmer to manually call for help by turning on the switch. It will also trigger the alarm system and the emitter to send signals to rescuers.

Covert Communication Device

Ahmad Abuisneineh, Srivardhan Sajja, Braeden Smith

Covert Communication Device

Featured Project

**Partners (seeking one additional partner)**: Braeden Smith (braeden2), Srivardhan Sajja (sajja3)

**Problem**: We imagine this product would have a primary use in military/law enforcement application -- especially in dangerous, high risk missions. During a house raid or other sensitive mission, maintaining a quiet profile and also having good situational awareness is essential. That mean's that normal two way radios can't work. And alternatives, like in-ear radios act as outside->in communication only and also reduce the ability to hear your surroundings.

**Solution**: We would provide a series of small pocketable devices with long battery that would use LoRa radios to provide a range of 1-5 miles. They would be rechargeable and have a single recessed soft-touch button that would allow someone to find it inside of pockets and tap it easily. The taps would be sent in real-time to all other devices, where they would be translated into silent but noticeable vibrations. (Every device can obviously TX/RX).

Essentially a team could use a set of predetermined signals or even morse code, to quickly and without loss of situational awareness communicate movements/instructions to others who are not within line-of-sight.

The following we would not consider part of the basic requirements for success, but additional goals if we are ahead of schedule:

We could also imagine a base-station which would allow someone using a computer to type simple text that would be sent out as morse code or other predetermined patterns. Additionally this base station would be able to record and monitor the traffic over the LoRa channels (including sender).

**Solutions Components**:

- **Charging and power systems**: the device would have a single USB-C/Microusb port that would connect to charging circuitry for the small Lithium-ion battery (150-500mAh). This USB port would also connect to the MCU. The subsystem would also be responsible to dropping the lion (3.7-4.2V to a stable 3.3V logic level). and providing power to the vibration motor.

- **RF Communications**: we would rely on externally produced RF transceivers that we would integrate into our PCB -- DLP-RFS1280, https://www.sparkfun.com/products/16871, https://www.adafruit.com/product/3073, .

-**Vibration**: We would have to research and source durable quiet, vibration motors that might even be adjustable in intensity

- **MCU**: We are likely to use the STM32 series of MCU's. We need it to communicate with the transceiver (probably SPI) and also control the vibration motor (by driving some transistor). The packets that we send would need to be encrypted (probably with AES). We would also need it to communicate to a host computer for programming via the same port.

- **Structural**: For this prototype, we'd imagine that a simple 3d printed case would be appropriate. We'd have to design something small and relatively ergonomic. We would have a single recessed location for the soft-touch button, that'd be easy to find by feel.

**Basic criterion for success:** We have at least two wireless devices that can reliably and quickly transfer button-presses to vibrations on the other device. It should operate at at *least* 1km LOS. It should be programmable + chargeable via USB. It should also be relatively compact in size and quiet to use.

**Additional Success Criterion:** we would have a separate, 3rd device that can stay permanently connected to a computer. It would provide some software that would be able to send and receive from the LoRa radio, especially ASCII -> morse code.