Project

# Title Team Members TA Documents Sponsor
41 Smart Tool Chest
Devansh Solanki
Kevin Boldingh
Stephen Hall design_document0.pdf
final_paper0.docx
other0.ino
other0.ino
presentation0.pptx
proposal0.pdf
video
We would like to take a tool chest and monitor its contents, keeping track of what parts are missing, as well as logging when parts were removed and returned. The project will include weighted plates & buttons for data acquisition, a hardware controller to accept input from the plates, and a touch screen to display the inventory or update it.

The weighted plates rest on these buttons and are weighted enough to not actuate a push button switch, but would actuate with minimal force. This would require tools to be placed in specific places (on specific plates). The plates are weighted such that anything over 25g would compress the switch. At the rear of the drawers we would place contacts to send signals through the back plate of the tool chest, to avoid wires being pulled when the drawer is opened. Also, this would help with multiple presses while the drawer is open, since the state of the tool will only update when the drawer is closed and the contacts meet. We would use another switch mounted behind the drawer to determine whether the drawer is closed. Since reading all these signals would require many inputs to our controller we can pass them through a multiplexer. We would loop through all mux inputs in software to get updates on tool availability.

We plan on designing the hardware controller ourselves; it will include a screen for the controller to display the inventory. The controller will include inputs from sensors for data acquisition and a processor to organize the data and drive a touch screen that allows the user to interface with a user application. The user interface will allow users to check the inventory, as well as enter items into the database for future use.

S.I.P. (Smart Irrigation Project)

Jackson Lenz, James McMahon

S.I.P. (Smart Irrigation Project)

Featured Project

Jackson Lenz

James McMahon

Our project is to be a reliable, robust, and intelligent irrigation controller for use in areas where reliable weather prediction, water supply, and power supply are not found.

Upon completion of the project, our device will be able to determine the moisture level of the soil, the water level in a water tank, and the temperature, humidity, insolation, and barometric pressure of the environment. It will perform some processing on the observed environmental factors to determine if rain can be expected soon, Comparing this knowledge to the dampness of the soil and the amount of water in reserves will either trigger a command to begin irrigation or maintain a command to not irrigate the fields. This device will allow farmers to make much more efficient use of precious water and also avoid dehydrating crops to death.

In developing nations, power is also of concern because it is not as readily available as power here in the United States. For that reason, our device will incorporate several amp-hours of energy storage in the form of rechargeable, maintenance-free, lead acid batteries. These batteries will charge while power is available from the grid and discharge when power is no longer available. This will allow for uninterrupted control of irrigation. When power is available from the grid, our device will be powered by the grid. At other times, the batteries will supply the required power.

The project is titled S.I.P. because it will reduce water wasted and will be very power efficient (by extremely conservative estimates, able to run for 70 hours without input from the grid), thus sipping on both power and water.

We welcome all questions and comments regarding our project in its current form.

Thank you all very much for you time and consideration!